- What type of injuries can occur in a struck by incident?
- What are the focus four hazards?
- What information does an SDS contain?
- Is ergonomics a hazard?
- What are the four common types of struck by hazards?
- What are the big four hazards?
- What are employers required to keep employees safe from Caught in and between hazards from hand held power tools?
- What are the hazards when working around heavy equipment?
- What injury might you get if you are caught in a trench cave in?
- What is the definition of a struck by hazard?
- How can hazards be prevented from being struck?
- What type of struck by hazard would a hard hat protect you from?
- What are the major types of caught in and caught between hazards in construction?
- What are the 3 hazards of electricity?
- Which of the following will help avoid a struck by incident?
What type of injuries can occur in a struck by incident?
Struck by hazards are categorized by: flying object, falling object, swinging object or rolling object.
Caught in or between hazards are categorized by: cave-ins, being pulled into or caught in machinery and equipment or being compressed or crushed between rolling, sliding or shifting objects..
What are the focus four hazards?
What OSHA calls the “Focus Four Hazards” are Fall Hazards, Caught-In-Between Hazards, Struck-By Hazards and Electrical Hazards. Anything that could cause a worker to lose balance and result in a fall is considered a fall hazard. Falls continue to be a leading cause of injury and death within the workplace.
What information does an SDS contain?
The SDS includes information such as the properties of each chemical; the physical, health, and environmental health hazards; protective measures; and safety precautions for handling, storing, and transporting the chemical.
Is ergonomics a hazard?
Ergonomic hazards are factors in your environment that can harm the musculoskeletal system. The are Injuries that are caused by strain placed on the body from ergonomic hazards and aren’t always immediately obvious, making these hazards difficult to detect.
What are the four common types of struck by hazards?
There are four common struck-by hazards in construction: struck-by flying objects, struck-by falling objects, struck-by swinging objects and struck-by rolling objects.
What are the big four hazards?
These presentations focus on the Big Four Construction Hazards – falls, electrocution, caught-in and struck-by. All training materials will cover the four hazards seen regularly on construction sites and will focus on the methods for the recognition and the prevention of these common hazards.
What are employers required to keep employees safe from Caught in and between hazards from hand held power tools?
According to OSHA, requirements employers must do to protect workers from caught-in or -between hazards include, but are not limited to, the following: Provide guards on power tools and other equipment with moving parts.
What are the hazards when working around heavy equipment?
Under suspended or overhead loads. Overhead hazards (i.e. overhead utility lines, and overhead piping/cable trays, etc.) Working over or around existing underground facilities. Close proximity of moving equipment.
What injury might you get if you are caught in a trench cave in?
Trench cave-ins often result in death for the trapped workers. When they survive, workers may suffer crush injuries, traumatic brain injuries (TBI), internal injuries, spinal cord injuries, broken bones and a host of other serious injuries.
What is the definition of a struck by hazard?
Struck-by injuries are produced by forcible contact or impact between the injured person and an object or piece of equipment. Having said that, it is important to point out that in construction, struck-by hazards can resemble caught–in or –between hazards.
How can hazards be prevented from being struck?
Use personal protective equipment to prevent being hit by falling or flying objects. Wear a hard hat, safety glasses, goggles, and face shields. Wear hearing protection when needed.
What type of struck by hazard would a hard hat protect you from?
Falling and Flying Objects Hard hats can help protect you from this type of incident. Suspended loads can also fail and fall on top of someone. When hoisting and rigging equipment, make sure it’s being done properly.
What are the major types of caught in and caught between hazards in construction?
Types of Caught-in or -between Hazards machinery which has unguarded moving parts or is not locked out during maintenance; unprotected excavations and trenches; heavy equipment that tips over, collapsing walls during demolition; and. working between moving materials and immovable structures, vehicles, or equipment.
What are the 3 hazards of electricity?
The main hazards with electricity are:contact with live parts causing shock and burns.faults which could cause fires;fire or explosion where electricity could be the source of ignition in a potentially flammable or explosive atmosphere, e.g. in a spray paint booth.
Which of the following will help avoid a struck by incident?
Some additional useful tips to help avoid struck-by accidents include:Workers should always wear proper PPE such as hard hats, safety glasses, goggles and face shields to help protect from workers from falling objects.Strive to maintain a safe distance outside of the swing radius for cranes and backhoes.More items…•